Detailed below are the supplies we require and the schedule for fixing the wall of the dojo along with cleaning and painting.

Supplies:

For the Wall:

Need to purchase:

6 sheets of plywood (estimated, should measure and possibly revise)

Screws

Need to borrow:

Screw guns (maybe 3-4)

For Cleaning:

Need to purchase:

Dust Masks

Sponges on sticks (everything is better on a stick)

Cloths

Need to borrow:

Steam cleaner (Dennis?)

Ladders (Skip and Zach)

For Painting:

Need to purchase:

Paint (need to determine how much)

Rollers

Brushes

Masking Tape

Drop cloths (hopefully we can borrow these)

Schedule:

Friday:

Perhaps a special class starting early

After class remove everything from walls and storage and place on ground/mat

Saturday:

Move everything from ground/mat to parking lot

Step 1:

Cleaning crew begins to clean the walls, steam the carpets and drapes, wipe down couches, pine-sol wood, and clean the storage area

Demo crew knocks out the wall

Step 2:

Painting crew begins to paint the walls

Building crew hangs the plywood

Step 3:

Once the plywood is hung and painting is finished everything must be moved back in from the parking lot

In the evening possible second coat if required

Sunday:

Touch ups if necessary

Rehang and store everything

Finish cleaning and perhaps mop the floors

Optional:

This may also be a good time to install the mirror everyone has been talking about

Rather than rehanging the old boards, we can take this opportunity to update and add other boards

What must be done before we can get to work:

We need to figure out how to procure all of the supplies we require (commit to lending, donating, or using dojo funds)

We need to set a date for this to occur

Post questions, comments, suggestions, and possible dates in the accompanying forum post. Lets make this happen!

Read original blog post

The plan is to reinforce the wall behind the lists, 6 sheets was Skips estimate for how many we would need.

Great ideas!

 

It also occured to me that I had forgotten to list any of the tools we need for the demo.